Kirigami for Beginners: Single-Sheet Paper Cutting Guide
Kirigami is the art of cutting paper - the word comes from the Japanese kiri (cut) and kami (paper). In its strict sense it means cutting and folding a sheet into a 3D form; in craft shops today it usually means a single sheet cut into an intricate silhouette picture, the kind you frame against a coloured background or light from behind. This guide covers both meanings, then shows how to cut your first single-sheet design by hand or on a Cricut or Silhouette, how to finish it, and which designs are good to start with.

What Kirigami Is (and What It Is Not)
The word was popularised in the West by Florence Temko, whose 1962 book Kirigami, the Creative Art of Papercutting was successful enough that the term stuck as the general name for paper cutting. Paper cutting itself is much older and grew up in many places - Chinese jianzhi, Japanese kirie ("cut picture"), German and Swiss Scherenschnitte, Polish wycinanki.
| Term | What it usually means |
|---|---|
| Origami | Folding only, no cuts |
| Kirigami (strict) | Folding plus cuts, often opening into a 3D form - like a paper snowflake or a pop-up |
| Kirigami (as sold for Cricut) | A single sheet cut into a detailed silhouette picture, no folding |
| Layered light box | Several cut sheets stacked with spacers, lit from behind |
Our kirigami designs are the single-sheet kind: everything is one connected piece of paper, so there is no stacking and no spacers. That makes them the quickest paper cut project to finish - and the best way to learn clean cutting before you try a layered light box.
What You Need
- Paper: a smooth, matte cardstock. For hand cutting, lighter paper (around 120-160 gsm) is easier to cut accurately; on a machine, 160-200 gsm holds fine detail without tearing. Black or white gives the classic look.
- A background: a contrasting sheet - white behind black, a colour behind white - or a light source.
- For hand cutting: a craft knife with a fine blade, plenty of spare blades and a self-healing mat. Our art knife guide compares blade shapes.
- For machine cutting: a fresh fine-point blade and a mat with good grip.
Cutting by Hand
- Print the PDF on the back of your paper. Cut from the back so any pencil or print lines stay hidden.
- Cut the smallest, innermost pieces first. The sheet is strongest while it is still mostly intact. Save the outer border for last.
- Move the paper, not your hand. Rotate the sheet so you always pull the knife towards you at a comfortable angle. Curves come out smoother.
- Change the blade often. A blunt blade drags and tears thin bridges. If the paper starts to fuzz, change it - blades are the cheapest part of the craft.
- Do not force pieces out. If a piece will not drop free, re-cut the corner rather than pushing it.
- Stop when you are tired. Most broken bridges happen in the last tired twenty minutes.
Cutting on a Cricut or Silhouette
- Upload the SVG (Cricut) or DXF (Silhouette Studio free edition). Our guides cover uploading SVGs to Design Space and opening files in Silhouette Studio.
- Keep it one piece. The design is one connected shape; do not ungroup or resize parts separately, or the bridges may break.
- Size up if the detail is too fine. If your machine tears small bridges, enlarge the whole design a little rather than changing settings again and again.
- Weed on the mat. Peel the mat away from the paper, not the paper from the mat. Our weeding guide explains why.

Three Ways to Display It
- Flat on a contrasting background. Glue a black cut onto white or coloured card with tiny dots of glue, then frame it. Clean and classic.
- Floating, with a shadow. Mount the cut a few millimetres above the background on small foam dots. Side light then throws a soft shadow and the piece looks three-dimensional.
- Backlit. Put a white cut in a shadow box frame with an LED behind a sheet of tracing paper. Single-sheet designs glow evenly because there are no layers to cast dark patches.
Single-sheet designs are easy to personalise: cut a name or a date from the same paper and mount it below the picture. It is the quickest handmade gift in this whole craft.
65 kirigami designs
Animals, flowers, seasons and faith - single-sheet cut files with SVG, DXF, PDF and PNG.
Browse kirigami designsDesigns to Start With
Nature and animals
Seasons and occasions

Frequently Asked Questions
What is the difference between kirigami and origami?
Origami uses folding only. Kirigami adds cutting. In craft shops, kirigami often means a single sheet cut into a detailed picture with no folding at all.
Who named kirigami?
The term was popularised in the West by Florence Temko through her 1962 book Kirigami, the Creative Art of Papercutting. It combines the Japanese words for cut and paper.
Can beginners cut kirigami by hand?
Yes. Start with a symmetrical design with open spaces, use lighter paper and a fresh fine blade, and cut the smallest inner pieces first.
What paper is best for kirigami?
Smooth matte cardstock. Around 120-160 gsm is easier by hand; 160-200 gsm suits a cutting machine and holds fine detail.
Do I need a light or a frame?
No. A single-sheet cut looks good glued flat on a contrasting background. A frame protects it, and an LED behind tracing paper makes a white cut glow.